Frequently Asked Questions
Do you offer any financing or funding options?
We are happy to explore funding and financing options that best suit your needs. Please contact sales@biospherix.com to discuss available solutions.
How do you ensure sterility and continuous supply of gases in your Xvivo System®?
Ventilation is performed through a vacuum to any remote location, and this vacuum only pulls as the gases are infused. The gas is passed through multiple filters for sterility.
Is the software Annex 11 compliant or 21CFR part 11?
Yes, our software is 21 CFR part 11 compliant.
Do you require ducting for your Xvivo System®?
There is no HVAC or ducting required for our Xvivo System®.
Is there any commercial facility using your system for manufacturing?
Yes, we have many companies and institutions using our system for IND approved clinical trials, globally. Please contact sales@biospherix.com for more details.
What products do you recommend for cell research studies?
For cell research, we recommend the C-Chamber, ProOx C21, OxyCycler C42, and the Xvivo System model X3.
What BioSpherix products are typically used for in vivo studies?
BioSpherix designs all of our in vivo products with ethics and safety considerations in mind. Our two most common products in the in vivo space is the ProOx 360, A-Chamber, and the OxyCycler A84.
How often should I change my oxygen sensor?
We recommend changing the sensor about every 18 months.
How often should I calibrate my oxygen sensor?
We recommend sensors are calibrated on a monthly basis. Visit our YouTube channel for a step by step guide on sensor calibration: https://www.youtube.com/@CytoCentric
How fast can you deliver across the world?
After order acceptance, we can build, test, and crate most systems within 2-3 months, estimated at the time of order. Once crates are on site, systems usually takes no more than 2-3 weeks to install and validate, which is scheduled at a mutually ...
What is the annual operating cost of an Xvivo GMP System®?
The average operating cost for an Xvivo GMP System® X2unit is around $10-12k per year, depending on the configuration, compared to the nearly 6-figure or more cost of traditional cleanrooms.
How do I replace the sensor pods in my system?
Changing out the sensor pods is quick and easy. Refer to the following videos from our YouTube channel for a step-by-step guide. Xvivo System X2 Maintenance – Sensor Pod Change Xvivo X3 Maintenance – Sensor Pod Changes
How do I calibrate my sensors?
Calibrating the sensors on your unit is quick and easy. Check out the following YouTube links to see how it’s done. Xvivo X3 Maintenance – Checking Oxygen Calibration Xvivo System X2 Maintenance – Checking Oxygen Sensor Calibration ProOx E702 Sensor ...
How do I export the alarm records and data records?
Your alarm records and your data records are going to be separate. Unfortunately, the alarm comments and record is not tied into the exporting of data. If you want your alarm records, here are the following steps to take: 1) On the main screen, click ...